STRAIN GAUGES DESIGN & PRODUCTION AND STRAIN GAUGES IN STOCK (see appendix) 

Design and manufacturing of foil type strain gauges

Capabilities

• gauge types: simple & multiply measuring grids, full bridge, rosette, chain etc.
• preferred material: Constantan-polyimid laminations
• fine line etching: down to 15 microns lines and spacing on 3-5 micron foil
• all resist, hard bake, print and etching operations are done under controlled conditions
• computerized process control, closed loop real time quality feed back
• high speed gauge testing linked to electronic mapping
• continuous quality analysis, strict QC according to the ISO demands
• automated handling system for resist coating and etching

FINE LINE WET CHEMICAL ETCHING  of

High precision thin film resistors (Cu, Constantan, Fe-Ni alloys etc.) and etched two dimensional thin film microstructures and micromechanical elements by custom’s demands.

Capabilities

• fine line etching of thin films: down to 15 microns lines and spacing on 3-5 micron foil
• single and double sided chemical etching of thin metal sheets with thickness up to 100 microns
• all process steps are done under controlled conditions
• computerized process control
• high speed testing
• continuous quality analysis, strict QC according to the ISO demands
• automated systems for resist coating and etching

TECHNOLOGICAL SYSTEMS- Process & Equipment Development and Manufacruring

Developement and manufacturing of customs designed automated technological equipment, measuring systems, e.g. automatic photoresist dip-coating system, automaticstrain gauge bridge measuring system, very fast (< 30 sec) p-V_out measuring and evaluating system for pressure transducers (< 3000 bar) etc.

PRESSURE TRANSDUCER

Based upon proven strain gauge technology MikroT has developed a range of precision wide range of pressure transducers which have broad application possibilities from the oil inductry to the diesel auto control systems etc. The transducers have exellent linearity. low hysteresis, broad operating temperature according to the customs requirements.

Main specifications

PHOTOMASK DESIGN  & MANUFACTURING of

• reticules and masters for strain gauge, hybrid circuits, thin film resistors, two dimension microstructure manufacturing and
• high contrast optical elements: gratings, code bars, code discs, microscope reticules, resolution test targets etc.

Capabilities

• Reticules up to 5” X 5” ,with a resolution down to 10 microns
• Masters up to 5” X 5”, with a resolution down to 3 microns
• Mask hard copies up to 5” X 5”
• Precision: 0.8 microns
• 1:1 field size: 12 X 12 mm
• Material: Low reflective hard chromium glass mask blanks, thickness: 1.6 and 2.1 mm
• Data formats: dwg (AUTOCAD), dxf, hpg, David Mann etc.
• Manufacruring under FS 209/B Class 100 conditions

 Appendix:  STRAIN GAUGES DESIGN & PRODUCTION AND STRAIN GAUGES IN STOCK